Drain plug bung for Dinghy / Boat / Kayak with gasket and oval mounting plate

Description

Simple to fit , this drain plug and housing is mounted into the kayak deck or transom by two screws or rivets (not supplied) in the recessed holes of the housing.

The drain plug is held from pulling completely out by a keeper moulded on the end of the thread. An ‘O’ ring gasket seal provides a conformable fit against the housing when screwed fully home. The thread profile on the bung and housing is common to most of the drain plugs on the market of this design

At a glance:

• Male plug and female socket
• Thread hole diameter – 21mm
• Oval housing dimensions – 32mm high x 55mm wide x 15mm depth 
• Distance between fixing hole centres – 40mm
• Fixing hole size – max 5mm
• Moulded keeper on the end of the thread stops the drain plug being completely pulled out and lost
• 1 fitting supplied in a pack

Note: This drain plug is different to the direct coarse thread screw in bungs which screw directly into the moulding on sit on top kayaks and do not screw into an oval housing plate -for the direct coarse thread screw in bung please see our item AU05B